OKUMA LU-15 OSP 7000 Threading problem
Hey guys,
I need some help here.
I'm trying to cut 1 1/2 12 threads and something is wrong.
When running this code here it barely moves it would polish the bar instead of cutting threads.
G71 X 1.390 Z -8.6D0.010H0.114F0.08333M33M74
The only way I can get it close to cutting 12 TPI is set the feed times 100 Example F8.333.
Is there some parameter I have off somewhere?
Thanks Okuma gurus!
Re: OKUMA LU-15 OSP 7000 Threading problem
yes, there is setting, telling if feedrate is in 0.1 or 0.01 or 1.0 for some comditions. Don't bother with that. If setting feedrate ×100 works, just use it.
Re: OKUMA LU-15 OSP 7000 Threading problem
hy :) try this :
G97 S567 M03 M08
T
G00 X1.390+2*radial_clearance Zradial_clearance
G71 X1.390 Z-8.6 D0.010 H0.114 F1/12 M33 M74 G95 ( maybe feed/revo is missing )
Re: OKUMA LU-15 OSP 7000 Threading problem
Quote:
Originally Posted by
deadlykitten
hy :) try this :
G97 S567 M03 M08
T
G00 X1.390+2*radial_clearance Zradial_clearance
G71 X1.390 Z-8.6 D0.010 H0.114 F1/12 M33 M74 G95 ( maybe feed/revo is missing )
Thanks somehow a G94 snunk in there after the G95!