Amada Vipros 357 TURRET PUNCH losing reference
Need Help, I have an Amada Vipros with Fanuc 04PC. The machines starts fine but after about 1 hour running the Axis Reference light turns off, I reference the machine again but as soon as the program starts running the light turns off again. Has anyone had this issue too? Please help!
Re: Amada Vipros 357 TURRET PUNCH losing reference
Quote:
Originally Posted by
Florcampos
Need Help, I have an Amada Vipros with Fanuc 04PC. The machines starts fine but after about 1 hour running the Axis Reference light turns off, I reference the machine again but as soon as the program starts running the light turns off again. Has anyone had this issue too? Please help!
You are most likely getting an emerg stop condition. That will drop NC Ready and Axis Ref led will turn off. You need to isolate the problem. Same place in the program? During X axis movement? Turret rotating? Oil pressure? Etc