Kitty MC2 Yasnac I80M head scratcher!
We just bought/installed this machine on Thursday. It's my first Kitamura and my first Yasnac control.
I love the machine, but the controller is proving a bit more challenging.
So far, I've been able to "bully" my way through getting offsets arranged and what not. What I'm really struggling with is the LACK of a tool offset page that openly displays the diameter callout!
All I can see is the tool height.
I've been on the phone with Kitamura, Yaskawa, I have the manuals that came with the machine and the dowloaded PDF's from the site.
Can anyone explain to me how to turn on/setup the screen so that BOTH Tool Height (G43 stuff) and Tool Diameter (G41/G42 stuff) can be seen on a single screen as illustrated on page 458 of Yaskawa manual TOE-C843-11.30F
Any help would be appreciated very much.
C.
Re: Kitty MC2 Yasnac I80M head scratcher!
I have the same issue, would be nice if you would post the parameter you changed.
Re: Kitty MC2 Yasnac I80M head scratcher!
Well I finally figured it out, no thanks to Longriflesinc. Called Yaskawa about some other questions and the tech had no idea about separating the H and D offsets, said I should contact Kitamura. I found it in the J300 user manual, thank you Yaskawa for having all of your manuals online!!!!!! It is pm4029 bit 0. Set to 1 separates H and D, set to 0 and they are the same input field. Fells like I just got a new machine.