-
pci parallel port
Sorry if repetitive: I am wondering if there are any problems/gotchas with using a PCI-parallel port card to output from the PC to the Gecko 540.
It's danged hard to find any older computer (that I would want to own!) that has a native parallel port anymore.
Steve
-
1 Attachment(s)
Re: pci parallel port
it will work if you enter the right hex address of the pci card lpt port. example https://www.cnczone.com/forums/attac...d=438112&stc=1
-
Re: pci parallel port
Hi,
PMDX sell a PCI to parallel card for CNC use.
Craig