Dah lih Fanuc 10m Parameters
Good afternoon everbody.
First time using this forum so i hope i am at the right place. I have a Dahlih MCV-760 machining center and we have lost the parameters for the machine. It is a 1988 model with a 10M control and it has digital AC servo motors.
Does anyone have the same machine that can help me out with the parameter? I have tried the agents and they can not help me, I even email Dahlih themselves without any luck
Re: Dah lih Fanuc 10m Parameters
Unfortunately this happens all to often where a CNC machine parameters and options are not saved, at some time in the life of the machine.
I have had good luck in the past with Dah-Lih but maybe due to the age the records are gone.
As a last resort you may have to get someone local to reconfigure it.
There are still a few around so hopefully you can get a copy that way.
Al.
Re: Dah lih Fanuc 10m Parameters
Quote:
Originally Posted by
Al_The_Man
Unfortunately this happens all to often where a CNC machine parameters and options are not saved, at some time in the life of the machine.
I have had good luck in the past with Dah-Lih but maybe due to the age the records are gone.
As a last resort you may have to get someone local to reconfigure it.
There are still a few around so hopefully you can get a copy that way.
Al.
Thank you Al. Will keep on trying
Re: Dah lih Fanuc 10m Parameters
Hi Jokky. I was in a similar situation a while ago. I bought a TC-10 Taki with 21 control.that was neglected. I sourced all the components and when I eventually got to switching on, the parameters were lost. I spoke to the agents and the applications guys couldn't help me.Taki also sent me to every mail address the have between Japan and Taiwan (why?) About a year ago I slowly, but surely started to strip out the electronics and started a retrofit with LinuxCNC. I am close to the end. With the limited time available to work on the machine, I would have a running machine in about two months.