Flow Water jet - Amplifier Faults and more..

Hi all,

I am currently having issues with the waterjet which has occurring over the year.
The main issue is trying to send the machine head to the "machine home" for it's start up routine which follows with "A pause or shut down has been activated. Check Advanced - Diagnostic tool.. to determine the cause of the pause or shut down".
After going on the " FlowSENSE Diagnostic" tool it shows up with;

"Amplifier fault shut down"
" X Axis Amplifier fault"
" Y Axis Amplifier fault".

Yet the amplifier's themselves are not showing any Fault codes..
Any ideas?

Give me a call....I can help you ....

MCP Services
678-548-1483
Maurice Phelps

Quote:

---

Originally Posted by MCPservice

Give me a call....I can help you ....

MCP Services
678-548-1483
Maurice Phelps

---

Hi, sorry for the late reply.

As we are in different time zones i won't be able to call you at a sensible time. Could you list your suggested solutions please?

Many thanks,
Jake

Quote:

---

Originally Posted by Jakeyy

Hi all,

I am currently having issues with the waterjet which has occurring over the year.
The main issue is trying to send the machine head to the "machine home" for it's start up routine which follows with "A pause or shut down has been activated. Check Advanced - Diagnostic tool.. to determine the cause of the pause or shut down".
After going on the " FlowSENSE Diagnostic" tool it shows up with;

"Amplifier fault shut down"
" X Axis Amplifier fault"
" Y Axis Amplifier fault".

Yet the amplifier's themselves are not showing any Fault codes..
Any ideas?

---

I am currently having the very similar issue that you have had. Did you find a solution to this problem?