-
Dyna torch line
Did anyone pick up the Dyna torch line, as far as I can tell there out of business., My smart motors appear to be all good, that is to say they all have green lights and will work for short periods of time before echo response faults occur. restart and it will operate as normal for a minute or so then fault out again.
-
Re: Dyna torch line
O.K we solved the problem on the Dyna Torch, Russell at (cncshopandservice.com) took over the remains of Dyna torch and now has a new line of cnc cutting tables.
He sent us a complete test procedure for the driver motors on our Dyna torch cutting table. After about an hour of testing the problem was identified.
They also can supply retrofits kits for the old Dyna's