Co2 Laser 6 KW with Stainless Steel 20 mm - Bystronic

Hello Colleagues
I have a problem when cutting 20 mm Stainless Steel on a C02 Laser of 6kw.
The cut itself i am OK ( when it cuts :( ) but when i do the initial piercing i have a build up of material that makes impossible to cut. The laser just stops cutting like 90% of the time.
Laser Type - Bystronic. Power 6 kw.
Please if you can to offer some help. It will be appreciated .



https://www.cnczone.com/forums/attac...d=429076&stc=1

Hello,you mean your CO2 cutting machine can not drilling?
James
whatspp:18600395818
Email:[email protected]

Quote:

---

Originally Posted by Weingold

Hello Colleagues
I have a problem when cutting 20 mm Stainless Steel on a C02 Laser of 6kw.
The cut itself i am OK ( when it cuts :( ) but when i do the initial piercing i have a build up of material that makes impossible to cut. The laser just stops cutting like 90% of the time.
Laser Type - Bystronic. Power 6 kw.
Please if you can to offer some help. It will be appreciated .



https://www.cnczone.com/forums/attac...d=429076&stc=1

---

Hi Weingold,why not take fiber optic laser source?

I have resolved it. New Lens. 1 step piercing. 25 seconds piercing time at 6kw power.

that's good.congratulations.if you need buy another one,than contact me .
James
whatspp:18600395818
Email:[email protected]

do you think its better for you to take a fiber optical cutter instead of CO2?

We cna help you to retrofit your machine with fiber laser.