Cant find router mounts for the KRMx01
Hello again
I am having a heck of a time finding router mounts. K2CNC is of no help, (are they still in business? I can't even get the site to load), as is anywhere else I have searched been fruitless in locating a mount for any one of the 3 routers listed in the KRMx01 book. Is it going to be an issue of buying any fixed base router and having a machine shop make a mount and hope for the best? Buy a spindle w/mount and controller? I don't know.
Does anyone have any recommendations, suggestions? I want what is best for the KRMx01 CNC machine. I found all three routers listed in the build book, on ebay, but can't find the necessary mounts anywhere.
While searching on ebay I found some air cooled and water cooled 400W to 2.2kW spindles with mounts and PWM controllers that are supposed to work with Mach3 or a potentiometer if you don't want Mach3 to control the speed . Can something like these be used? Here is a link to one of the 400 watt spindles: CNC 400W Spindle Motor ER11 Mach3 PWM Speed Controller Mount Engraving Set | eBay
I really don't know if the 400W has enough umph. I don't think I want to mess with anything water cooled as it sound like a real pain. I need help please.
I am very new to all of this and really don't know what I need. All I know is I can't find what the book calls for and that's why I am here. You guys on this forum have been a great help so far and I have faith you will steer me in the right direction.
Thanks in advance for all of the help...
Re: Cant find router mounts for the KRMx01
Re: Cant find router mounts for the KRMx01
Awesome! Which router do you recommend? The Bosch 1617 or the Hitachi M12VC? I believe the Hitachi is the one used in the build and is a little less expensive...
Re: Cant find router mounts for the KRMx01
I've never used either, but I think the Bosch is a little better. Ton's of people use the Hitachi, though.
Re: Cant find router mounts for the KRMx01
Thank you very much for your help! I think I will go with the Hitachi as that is the one that was used in the book.
Re: Cant find router mounts for the KRMx01
Don't know what is going on with k2cnc.com, but they do have a facebook page. Maybe you can contact them that way. I done a whois on the domain and it does not expire till 2018. When doing an nslookup I get a server error. So either they no longer have a web page, or their provider is down.
Joe
Re: Cant find router mounts for the KRMx01
K2CNC can be problematic these days.
Try Velox CNC, they sell the same mounts.
veloxcncrouters
Here is the link to the Hitachi mount
http://veloxcnc.com/proddetail.asp?prod=RM-Hitachi
Re: Cant find router mounts for the KRMx01
Others have reported that the CNCRouter.com mounts work as well. In any case post your results back so others can benefit,
Re: Cant find router mounts for the KRMx01
I'm building a KRMx01 and here's the mount that I ordered for mine today: VeloxCNC (forum removed the link to it)
They sent me the STEP file and by the measurements there, it should bolt right up to the KRMx01 Z Plate.
Re: Cant find router mounts for the KRMx01
Thanks for the info. Post some pics when you get a chance.
Re: Cant find router mounts for the KRMx01
Quote:
Originally Posted by
msimpson99
Thanks for the info. Post some pics when you get a chance.
Will do. I think I will just start a new thread and post pics of my build there. I didn't keep an excellent record like Joe at MyHeap.com did, but his site was my inspiration for building the KRMx01 as my first build.
Re: Cant find router mounts for the KRMx01
I can confirm that the CNCRouterParts mounts work just fine with the KRMx01. Purchase just the mount (minus the adapter plate) and it will bolt directly to the KRMx01 Z-plate. I have a write up for the KRMx02 here:
CNC Router Parts Router Mounts — Kronos Robotics