compumill 4000 autocon dynapath delta cnc 50me controller help
recently bought a compumill 4000 with a delta 50me controller it is missing the hard drive it seems to run but get nothing on monitor im wondering if I can get the original software for it if its not in the flash memory and shouldn't I be getting some sort of signal to the monitor
Re: compumill 4000 autocon dynapath delta cnc 50me controller help
jerm16,
You should see the standard PC self-test information on the monitor on boot up even if there is no hard drive or working flash memory.
The monitor on a Delta 50 gets a standard VGA monitor signal from the controller. Hook up a VGA monitor directly to the controller to see if the monitor is the issue. If you are still getting no display you may have a power supply or main board issue.
RT
Re: compumill 4000 autocon dynapath delta cnc 50me controller help
Did you try booting without the hard drive using your external monitor just to see if it goes through the boot up sequence?
RT
Re: compumill 4000 autocon dynapath delta cnc 50me controller help
The hard drive is an option on Delta 40/50 and is not needed for normal operation. I believe it's just used for extra program storage capacity and conversational graphics files (also an option). The executive program is stored on the memory card (which has it's own separate battery that can die).
RT
Re: compumill 4000 autocon dynapath delta cnc 50me controller help
There are two batteries on the controller. One is for the parameter ram on the main board, the other is for the memory card. There are also several variations of main boards with different battery configurations (some soldered, some replaceable). If you are not certain what battery you are dealing with and its suitable replacement, please post a picture here on the site or give Dynapath a call to obtain a replacement -- they have always been most helpful for me.
RT
Re: compumill 4000 autocon dynapath delta cnc 50me controller help
It looks like the option key is missing or damaged. The option key looks like a watch battery and is located on the axis card. Dynapath will be able to identify the meaning of this error message for you.
RT
Re: compumill 4000 autocon dynapath delta cnc 50me controller help
I was afraid of that. Hopefully your axis board is not fried as well. Can you contact the person who sold you the machine and see if they still have the key they replaced with a battery?
Re: compumill 4000 autocon dynapath delta cnc 50me controller help
Good to know, I've always had good support from Dynapath.
RT