Biesse 321r NC 481

Hi all,
My battery failed over the long weekend lost all machine data programs etc etc !!!

I have disks with everything on them but need to know the process of putting the info back into the machine.

send me your mail, i will email to you the steps.

I have the same problem like madmuz. I have disks too. But i haven't how load it. Do You help me knap?

Hi guys. Me too. Just acquired a Rover 18 which I saw working before I bought - and the internal battery has died and lost all the machine data etc. I have the disks but can't find a way of reloading the data. Any help much appreciated.

Hi. I've got machine data.

Hello Friend. I'm interested in whether and how they could send me a disk with parameters for biesse rover 18 computer is nc481. Because I have the same problem as you do with the battery, and I have replaced the same just missing parameters. Sorry for my bad English,
Thanks in advance!!!

Hola Madmuz

i am from chile , i have one big problem with machine rover 321R error 332 333 no position axis , if posible failure electronic card Rcx2 ?
If you had a similar fault podriar help giving an advice

best regards

Need help !
When I turn on Rover 321 nc481 on screen appears "Bdos Err On C: Select" and that it I cant even hit enter nothing happens! Before that few days it said that the disc A is not ready (floppy) but my diskette is valid.
What i need do to?

I see that you have same problem. My battery die too so I replace but still doesnt boot up.
Same error A floppy, but floppy is working.
What can be.
Can anyone send me some solutions on [email protected] ?

Hi All,

I also have a Biesse Rover 321R with a NC481 controller.

Battery died last week and I have replaced it with a genuine Biesse part.

Machine now boots and everything is reset and in Italian.

I don't have the original set of Floppy Disks that came with the unit.

Can anyone help me out with a copy?

Have contacted Biesse parts Australia but haven't heard anything back.

Cheers

Hi
We have a Biesse a NC481 controller.
The battery died and I replaced it.
Transferred machine data from the floppy disk but did not transfer it.They are all still at zero.
I need help please.

hola, soy nuevo y necesito ayuda mi rover 321 r de biesse controlador cni nc 481 se quedo sin bateriaperdiendo todos sus datos. Al cargar los drivrers se me colgo y no me deja hacer nada, solo arranca boot y me deja errores de falta de controladores ES803 ES58 S023010 S022999 S011 AD58 AV21 AV20 I011. Nesecitaria saber de alguien con la experiencia en carga de archivos plc idioma y valores generales de maquina. Gracias

hola,e visto que hace unos años te ayudaron con un problema similar al mio mi rover 321 r de biesse controlador cni nc 481 se quedo sin bateriaperdiendo todos sus datos. Al cargar los drivrers se me colgo y no me deja hacer nada, solo arranca boot y me deja errores de falta de controladores ES803 ES58 S023010 S022999 S011 AD58 AV21 AV20 I011. Nesecitaria saber de alguien con la experiencia en carga de archivos plc idioma y valores generales de maquina. Gracias

Hi everyone. I have an old 321R with CNI481 contrôler.
The machine today boots but the axis are all in 0.00 and the machine refuses to work.

Error code :
S011
S020101
S023872.

Anyone knows how to fix this ?

The machine boots normally.
Is the battery dead ?
What steps should i follow?

Thanks everyone ????