Hurco vs Akira Seki and DMG
If you want to write quick toolpaths using 2D geometry the Hurco is the way to go. The Ultimax control is limited as far as 3D surfacing being programmed at the control. However...The Hurco's run in gcode mode also, as long as you purchase the option. If the Hurco you order does not have a spindle chiller on it, you can expect some major Z creep as the spindle heats up. Now if you want to buy a quality machine...Definitely consider the DMG. I have had great experiences with DMG's with Heidenhain and Siemens controllers. Very nice equipment. I have never used an Akira Seki, but have used Mori Seki's with Fanuc controls. Love the machine...Dont like the Fanuc control. Hope this helps. Make sure if you choose to purchase a Hurco that you buy the .DXF converter so you can import 2D geometry from CAD.
Chris