Anilam offline 3000m and Win7 64b
I've converted to WIn7 64bit and trying to get my Anilam offline SW to run again. First I got the 16bit not supported error, so I loaded up the WinXP mode and that seems to work, but now when I run the Anilam offline it says it can't initialize my graphics card to full screen. Setting The WinXP virtual OS to full screen first does not help.
Anyone have any recipes that allow Anilam 3000m offline to run in Win 7?
Thanks.
Re: Anilam offline 3000m and Win7 64b
Install a program called DosBox. You can download it here... DOSBox, an x86 emulator with DOS
Then you need to configure it to make it easy to run the Anilam offline program.
Go to "Start" button and then "All Programs"
Find "DOSBox-0.xx" program folder and click it to open
Then click on the "Options" folder
Then click on "DOSBox 0.xx Options"
Note: if it doesn't open and asks you to select a program, pick "Notepad"
When that opens, scroll to the bottom and you'll see [Autoexec] section
Add the lines below
mount c c:\p3m
c:
runcnc.bat
Save the file
Now run the icon on your desktop named "DOSBox 0.xx"
Re: Anilam offline 3000m and Win7 64b
Quote:
Originally Posted by
springer-
Install a program called DosBox. You can download it here...
DOSBox, an x86 emulator with DOS
Then you need to configure it to make it easy to run the Anilam offline program.
Go to "Start" button and then "All Programs"
Find "DOSBox-0.xx" program folder and click it to open
Then click on the "Options" folder
Then click on "DOSBox 0.xx Options"
Note: if it doesn't open and asks you to select a program, pick "Notepad"
When that opens, scroll to the bottom and you'll see [Autoexec] section
Add the lines below
mount c c:\p3m
c:
runcnc.bat
Save the file
Now run the icon on your desktop named "DOSBox 0.xx"
That worked with a few modifications.
There is no folder in my start/All Programs path for DOSbox. Just a single executable not in a folder.
The file: C:\Users\xxx\AppData\Local\DOSBox\dosbox-0.74.conf is the file I had to add the Autoexec lines to.
When it comes up Anilam complains about unknown drive type (CDS), cannot perform disk check on C: Press f10 to continue.
After pressing f10 it seems to be happy.
Thanks for this!
Re: Anilam offline 3000m and Win7 64b
i am trying to do the same thing but after the CDS it says error at the top and then cannot find your controller board. i just wanted it offline any idea's
Re: Anilam offline 3000m and Win7 64b
Quote:
Originally Posted by
slasher102
i am trying to do the same thing but after the CDS it says error at the top and then cannot find your controller board. i just wanted it offline any idea's
Offline should not be looking for a controller board. Are you sure you are running the offline version?