Does anyone have parts manual for Okuma LC10 with OSP3000 control?
I have a big oil leak in the turret... so Ill be needing part numbers for sure, but I also want to have the schematic drawing so I can understand the electronic side of things as well when I disassemble.
Im pretty darn mechanical, but I dont want to take something a part - only to find out I lost the reference to the turret position and then have to figure out how to get it back... Id much rather know what and how, so I can hopefully avoid losing the positions and having to dig much much deeper.
Anyone have any experience or schematics they would be willing to share? I tried my Okuma dealer and they dont have the Parts book for the LC10 with 3000 control. They have it in .PDF for the 5000 but its noticeably different... so Im assuming not applicable for parts or theory of operation.
Thanks in advance
Wade
OK since you got it running....................
Maybe you can help me run mine. It seems to me that when in MDI I should be able to give the machine a T0505 and have the readouts display where the tool is, mostly on X. The reason for this is because I like to use the machine to rough things out before running the program. Kinda like a manual lathe. This all may seem a little like beginner questions and they are. I have been running a vertical machine center for most of my life and the boss thinks it would be cool to expand my horizons a little. I am up for it but he is not a great teacher of programming. Conversly when I call up a tool in a machine center and give it a tool length offset I know exactly where the end of the tool is in relation to the table or work or whatever I have set as z zero.
Sorry for the ramble
Fred
Parts manual for Okuma LC10 with OSP3000 control
Let me look, I might have the book you need, I will check that for you tomorow morning