Copying FIles getting Changed
I am having some trouble copying files from HDD or Floppy to T4 Parts Program Directory.
When I do smaller files say 20Kb or less I don't seem to have any problems. I am currently trying to import a 135Kb file and it does something during the "editing" part of the process that changes it to 29Kb and the Gcode is all garbled.
The only thing I can surmize here might be that I have to many lines of code from the CAM?
Help?
Re: Copying FIles getting Changed
Turns out N9999 is the max on the Dynapath controller we have. Resolved.
Re: Copying FIles getting Changed
Quote:
Originally Posted by
ejg3855
Turns out N9999 is the max on the Dynapath controller we have. Resolved.
...yes, Setup your post processor to start renumbering after N9999 Max then N0001 again. Also, you can insert/add blocks if and when editing using a decimal point. Nxxxx.xxx format of 4 place before and 3 place after decimal point.
