RE: Problem path code to S post
You have modified an Mpost PostItem instead of an Spost
Make sure your UNCX files are in your C:\SURFCAM\Postlib\Spost folder
Note, the INC2APT switches my not be correct for your Post
Try this instead.
PostItem MAZAK NEXUS 510
Status MAZAK NEXUS 510
Command "C:\SURFCAM\Velocity3\INC2APT" -w -5 -I "%p%n" -O "%p%N.apt"
ChDir "C:\SURFCAM\Velocity3\SPOST"
Delete "%p%N.NCC"
Command "C:\SURFCAM\Velocity3\SPOST\SPOSTM" "%p%N.apt" 2380 "%p%N.ncc"
Task "C:\SURFCAM\Velocity3\editNC\editNC" "%p%N.ncc"
Hmmmm not quite right yet...
Well, I can post a program now, but I'm not seeing any "A" axis moves in the program. I'm not sure if the UNCX files are any good for 4 axis milling though. I got them from Surfcam a few weeks ago. They said they were "public domain" and they may need to "contact your reseller for manipulation of this post if you need it changed". I sure would like to be able to do this myself, rather than be at the mercy of technical support. Our maintenance contract is up so we're screwed as far as help from Surfcam.
Steve