PP for Camotics/ Buildbotics
Hi, everybpdy,
I am tempted to buy a Buildbotics controller/ driver. It runs on camotics, Camotics says it runs a subset if LinuxCNC code. Here is the Camotics Gcode overview: https://camotics.org/gcode.html . Unfortunately, the LinuxCNC code made by Madcam will not run on Camotics. The Buildbotics support has said they could adjust the Madcam PP for me, but I rather not have to do that everytime I update my software. Soo, what PP could I use with Camotics? Or better just use another controller?
thanks, Maarten
Re: PP for Camotics/ Buildbotics
It might help if you spelled out what a Madcam PP is.
I'm currently making a batch of 10 BuildBotics controllers for some of my own projects. Finding parts is proving to be impossible at the moment, so most of them will sit on the shelf for the next 12 months until things (hopefully) return to normal.
Re: PP for Camotics/ Buildbotics
Quote:
Originally Posted by
haiqu
It might help if you spelled out what a Madcam PP is.
.
Oh, absolutely. Madcam is a CAM plugin for Rhnoceros, and what this subforum is about. And PP is the postprocessor that Madcam uses to translate its toolpath into an actual Gcode dialect.
best regards, Maarten
Re: PP for Camotics/ Buildbotics
Ah, now it makes sense. Depending on your programming skills, you could hack the postprocessor to output the correct codes for the BuildBotics.
Cheers, Rob
Re: PP for Camotics/ Buildbotics
Quote:
Originally Posted by
haiqu
Ah, now it makes sense. Depending on your programming skills, you could hack the postprocessor to output the correct codes for the BuildBotics.
Cheers, Rob
My programming skills... I'd rather no go there. Rather pay for a solution that I can trust to work.
cheers, Maarten