Printable View
hello everyone, im tring to set up my mist coolant system and i got few questions
im using gecko g540 driver + 48v 7.3a power supply
in addition i got 24v 1a power supply for my fans
i bought SSR with 3-36vdc input - 24-380vac output
im using output no' 5 at the gecko 12pin block
is it possible to use the 24v power supply for the dc side without any voltaeg dropage
and if so, which way should i connect it
i attached a scheme showing what i tought of doing
thanks !
Hi Drorness
does this help ?
John
hello john, thank youQuote:
Originally Posted by john_100
im using 48v power supply for the gecko g540
in addition i got 24v power supply for my fans and now for the ssr
do i need to connect the negative of the 24v power suplly to the negative of the 48v powersupply?
Hi
yes , connect the negative terminals of both power supplies to the G540
GND terminal 12 as on page 8 of the G540 manual V8 :-
http://www.geckodrive.com/images/cms...8%20Manual.pdf
John