Fanuc Robodrill Alpha T10-B
We have an Alpha T10-B Robodrill with a 16-MB control. This machine sat in our warehouse for years and had lost all of the SRAM. I had backups of th NC parameters and the Pitch Error Comp, but no back ups of the PMC parameters or O9000 macro subprograms.
Methods Machine helped me out with the PMC parameters from a simular machine, but I still don't have all of the Macro subprograms. This machine also has a pallet changer.
If anyone has copies of the macro subprograms for a T10-B Robodrill (1995 era) I would surely appreciate a copy.
Thanks,
Adam
Re: Fanuc Robodrill Alpha T10-B
hi
we are having - robodrill alpha t 10b with fanuc 16mb control
we dont have parameters back up.
Can any one help us for parameter for robodrill alpha t 10b please ?
Re: Fanuc Robodrill Alpha T10-B
I have parameters in PDF format from machines made in Feb 1995 and June 1995. They should be close enough to get you up and running. There will be some differences in your machine but should be close enough. I just went through this with my machine and Methods Machine did not have my exact serial number. No one could find it. So I rebuilt mine with what I found.
Send me an email address and I can send them to you.
Donny
Re: Fanuc Robodrill Alpha T10-B
Quote:
Originally Posted by
whiteriver
I have parameters in PDF format from machines made in Feb 1995 and June 1995. They should be close enough to get you up and running. There will be some differences in your machine but should be close enough. I just went through this with my machine and Methods Machine did not have my exact serial number. No one could find it. So I rebuilt mine with what I found.
Send me an email address and I can send them to you.
Donny
Dear Sir
my mail id is : [email protected]
Please help... thank you very much
Re: Fanuc Robodrill Alpha T10-B
Quote:
Originally Posted by
jayeshvasani
Email Sent.
Good luck,
Donny
Re: Fanuc Robodrill Alpha T10-B
i have Robodrill Alpha T10-B with Fanuc 16B
i lost all SRAM data
can any one have SRAM data soft copy
please help me
my e.mail : [email protected]
Re: Fanuc Robodrill Alpha T10-B
I have Robodrill Alpha T10-B 1995 with the fourth axis nikken Fanuc 16MB
i lost all SRAM data
can any one have SRAM data soft copy
please help me
Re: Fanuc Robodrill Alpha T10-B
Private message me your email address and serial number of machine
Quote:
Originally Posted by
robodrill-1995
I have Robodrill Alpha T10-B 1995 with the fourth axis nikken Fanuc 16MB
i lost all SRAM data
can any one have SRAM data soft copy
please help me