Mastercam X6 for plasma toolpaths
Hello every one,
I just bought an cnc plasma table.
Company that I bought this machine from showed a quick basic use of Mastercam X6 for generating tool path.
Problem is that what they showed me is setting toolpath for every contour manually. Now imagine situation when there is from 50 to 100 different parts and setting toolpaths one by one is frustrating.
Is there a way to set toolpaths automatically on all parts at once?
Re: Mastercam X6 for plasma toolpaths
I'm a mastercam user.... but...
I would not use mastercam as your programming solution...
Plasma cutting is either inside or outside cutting of closed(usually) profiles...
Consider a CAD package that may utilise a DXF file that would "offset" the plasma nozzle to the correct side (or selectable) profiles. The CAD software should also be able to "nest" multiple DXF files with different quantities into a single batch run
You could use Mastercam as a design seat that can output suitable DXF files, but I think X6 was not able to "nest" , it was a purchased add-on.
There are many to select from, look also at CADware used on water jet machines.
Re: Mastercam X6 for plasma toolpaths
I do use Autocad for designing parts, also do my nesting on Nesting Center, an online program in which I upload DXF or DWG, ant it spits out nested parts in DXF.
Next step is generating g-code for cnc plasma machine. For this I have to use Mastercam x6, because of post processor designed for this machine and CAM program.
I would gladly use Fastcam that I'm familiar with and use for other plasma machine, and it has automatic tool path generation function. With just 3 clicks X amount of parts gets there leads in and out with presented parameters.
Re: Mastercam X6 for plasma toolpaths
I would gladly ditch Mastercam and go with Fastcam that I'm using now. BUT, Fastcam that I'm using now with other plasma machine is kind of old (I thing its Fastcam 7, from 2007 or so), and I'm not sure how to change post processor, because it is selected from short list on installation.
New plasma machine (well, new for us) use Galil DMC 1830 motion controller, and I only have post processor for Mastercam X6.
Re: Mastercam X6 for plasma toolpaths
Cactus Club Cafe’s menu includes steaks, sushi, burgers desserts, vegan options as well as gluten-free foods and drinks. https://foodmenuprices.info/cactus-c...u-with-prices/
Re: Mastercam X6 for plasma toolpaths
Now imagine situation when there is from 50 to 100 different parts and setting toolpaths one by one is frustrating. https://www.exactinside.com/AZ-900-exactdumps.html