Some problem saw operation
Hey guys,
I use the scm post processor.
With a morbidelli 5x prism.
I have some problems with the nc output when applying a sawing operation.
Do more people suffer from this?
Does anyone have a solution for this?
I am testing something with the TPD of the saw.
Does anyone have a list of data that each number for function gives to the saw?
I would like to hear from you
Re: Some problem saw operation
Hello,
which problem you have? Output is as a XPL for a tilt plane? Im ussually set saw blade on this machine as a router tool. Because problems with a use XPL and XG0 ... for a tool set as saw blade.
Not sure what is exactly your problem
3 Attachment(s)
Re: Some problem saw operation
https://www.cnczone.com/forums/attac...d=436016&stc=1https://www.cnczone.com/forums/attac...d=436014&stc=1https://www.cnczone.com/forums/attac...d=436012&stc=1
Hey,
When I apply a saw operation inalphacam and export as pmg.
then I get another operation onthe machine (look maestro)
do you know a solution for this?
I like to hear from you.