VCarve Pro freezes up in 3D view toolpath playback
I am honestly find this $700 software the worst piece of software I have ever encountered.
(1) Licensing took over 1 hour, only manual licesning works, the default on-line license process stops with errors. Customer support of Vectris in the uk is arrogant, ignorant and of no help at all.
(2) Vectris now sent me a second private license key - For what??? Since when do uyou need 2 license keys?
(3) Worst of all: Software freezes up in the 3D view of one single simple drill hole tool path view. All work gone, no chnace to stop cancel the operation or even normally shut down the softweare or to safe the work. Only killing the process in the task manager brought me out.
(4) So my facit so far, I paid $700 bucks for a not working software and can not operate my several thousand dollars CNC machine.
Any ideas?
Is there a possibility to return and get a refund?
Any suggestions for a 100% WORKING CNC software?
I am greatly open and thankful for feedback, your experince and solutions.
Re: VCarve Pro freezes up in 3D view toolpath playback
Have you worked through any of the bundled tutorials?It is a slightly quirky piece of software and the CAD side of things is not the greatest but it does a good job of creating toolpaths.The 3d view is only for simulation and if you have it set for the very highest resolution,it is very slow.Have you found a working post processor for your machine and does the Gcode from it look viable?How does it compare with the software you previously used in other respects?
Re: VCarve Pro freezes up in 3D view toolpath playback
Ive had this same issue with another piece of software on a newer laptop, the problem is the Intel processor runs too fast for old software and causes a conflict, there is a fix but it is a long process and will slow your laptop down. I would not recommend it. I run vcave on an old laptop running XP and it runs great, I also have it on a Macbook running virtual box on XP also runs great.
My advice is to find an old laptop running windows 7 or older or run a virtual machine on your computer.
I made a guide on how to instal a virtual machine on a MacBook just get the newest version of VirtualBox (not the one in the guide) The appliance has Vcarve preinstalled.
https://www.instructables.com/Runnin...-Your-MacBook/
Re: VCarve Pro freezes up in 3D view toolpath playback
The OP hasn't been back here for several weeks so should we conclude that he found a way to make it work?