mastercam v9.1 and windows xp media edition arrows in chaining will not show up
Printable View
mastercam v9.1 and windows xp media edition arrows in chaining will not show up
Why not do a search at www.emastercam.com?
You will find your answers there.
Dan
Im not forsure on this but it could be the graphics card. Thats what my teacher at school said was the reasaon. he would change to a different screen and scome back to it somhow and the arrows would reappear
try slowing down your hardware acceleration, this should solve your problem. Had the same problem & this took care of it. it also made draft entitys visible when adjusting the placement of the draft
It's your graphics. Absolutely. What do you have for a video card? Or if it an "on-board" video (on the motherboard) like an Intel Video chip set. you will have to replace it.
Things you can try...
1) download the latest video drivers.
2) right click on the desktop, Properties, Settings(tab), Advanced, Troubleshoot and change the Performance slider down, one notch at a time, and try Mastercam again.
3) Replace the video with an Nvidia Card/Chipset.
I use the FX 5200, FX 5700, FX5900, and the all work great. These are the bottom end cards now days. They can ce had for as little as $40. Better card = better performance. Get as much memory as you can afford. Miinhave 128MB & 256 MB
Mike Mattera