Does anyone need service manuals for popular Doosan Machines?

Quote:

---

Originally Posted by Tallg

dhardt,

I need a full set of manuals for a 12S-B lathe.
Serial number PS100977.
Fanuc O-T control
I do not need programming or operation manual.
Need parts manual, maintenance manual and especially electrical.
I purchased the machine and the manuals were lost during shipment.

---

The Parts Book, The Electrical Book, The Instruction Manual, and The Operations Manual: all ship with the machine and are considered a "PART" which is sold. I CAN NOT PROVIDE THOSE HERE.

These are Doosan parts that are sold. The revenue from these manuals helps to pays for the respective companies to assist their customers with informative manuals and competent personnel that are able to go onto forums and assist those customers.

Please contact your local dealer with the serial number of your machine and they can get you a quote on replacement manuals.

I have NON-Part/NON-revenue manuals available (they cover a wide variety of uses. From repair to operation, and most are better oriented toward learning than the original manuals that ship with the machine. (But note: I do not have NON-revenue manuals for a machine as old as a 12S. I might have a few relevant Tech-docs...but I do not know which ones, off hand.)



The Parts Book, The Electrical Book, The Instruction Manual, and The Operations Manual: all ship with the machine and are considered a "PART" which is sold. I CAN NOT PROVIDE THOSE HERE.

Do you have the Spindle Maint./removal procedure for a Mynx 7500 Gear head?

i have an older Puma 2600Y S/N: ML0105-000313, i have an issue with an alarm NO. 2047 TURRET CLAMP SWITCH ALARM OR TURRET CONTROL UNIT ALARM, i have already followed the steps to fix the alarm by taking the back of the turret off and checking the distance form the dog and the switch(0.4 mm) i also unclamped and tried resetting the alarms and nothing happened, still have the same alarm. all i have is the operating manual and wiring diagram/ladder book, im also thinking im missing a manual or two,im fairly new to cnc repair seen but this is the first one that has me stumped. Any help would be most appreciated, Thanks

Quote:

---

Originally Posted by jhnlrs

Do you have the Spindle Maint./removal procedure for a Mynx 7500 Gear head?

---

Sorry. I do not.

Quote:

---

Originally Posted by the16vkid

i have an older Puma 2600Y S/N: ML0105-000313, i have an issue with an alarm NO. 2047 TURRET CLAMP SWITCH ALARM OR TURRET CONTROL UNIT ALARM, i have already followed the steps to fix the alarm by taking the back of the turret off and checking the distance form the dog and the switch(0.4 mm) i also unclamped and tried resetting the alarms and nothing happened, still have the same alarm. all i have is the operating manual and wiring diagram/ladder book, im also thinking im missing a manual or two,im fairly new to cnc repair seen but this is the first one that has me stumped. Any help would be most appreciated, Thanks

---

As you are postin here (this thread) I assume you would like a better service manual.

I attached one.
This is for the little brother of your machine. Procedures are similar, but use your parts book for the correct part numbers.

thank you for the help on the 2600Y, i was able to get everything all in order. i do however have another issue that ive been looking at but doosan has been unresponsive in my efforts to get help, i have a puma 18 S/N PM180009, our tail stock has been having bearing issues and am looking to rebuild the tailstock. i was looking for any procedure for this process, i have several machine manuals but nothing to do with this particular machine, as always thank you for the help dhardt.

I wonder if exist a manual for connection a Puma for example to Fanuc robot?

Hi I have a problem on a Doosan Lynx 220L when i index the turret it goes round and round wit out stopping Please help
Thanks
Leon Collatz
Cape Town
South Africa

I have an old DOOSAN PUMA 400MB and my boss wants to change out the bearings in the tail stock and was wondering if theirs a procedure i can follow for this, thank you

Do you have one for MX, ST 35GS manual?

Quote:

---

Originally Posted by youngdoo

Do you have one for MX, ST 35GS manual?

---

I notice that you are in Korea. Doosan Korea has the same (and more) manuals, written in Hangul.
Would you rather have those?

Quote:

---

Originally Posted by dhardt

I notice that you are in Korea. Doosan Korea has the same (and more) manuals, written in Hangul.
Would you rather have those?

---

Yes. Thank you