Running DDCS CNC Motion Control System with MPG, NEMA 23 Stepper Motor

https://www.youtube.com/watch?v=-jB_aiuNiN8&t=2s

DDCS CNC MOTION CONTROL SYSTEM WITH MPG, NEMA 23, 2 AXIS
Product Link:
https://www.automationtechnologiesin...system-nema-34

This system is assembled and tested. It is ready to run.

We can also update the system to 3 or 4 axis, or change to NEMA34 stepper motor.

Please contact us if you need.

E-mail: [email protected] Phone: 847-984-0882

Product Included:

1pc DDCS Motion Controller with MPG
2pcs KL23H2100-50-4BC Stepper Motor, 12 ft cable
2pcs KL-5056E Digital Stepper Motor Driver
1pc 48V/12.5A Switching Power Supply
1pc 24V/2A Switching Power Supply
2pcs Inductive Proximity Switch, NPN (extend to 12 ft cable)
1pc Aluminum Box
1pc Power Code & USB Extension Cable.

Features:

The DDCS numerical control system adopts the ARM+FPGA design framework. The ARM can finish the part of human-computer interface and code analysis and the FPGA can finish the part of underlying algorithm and control pulse generate, with the reasonable design, reliable control and easy operation.

The panel layout structure of DDCS is rational. The common off-line operation can be finished only by 17 keys and it supports the FANUC with high universality to be compatible with G code set. This specification introduces the operation method of caving machine’s special off-line CNC system, DDCS and the machine tool connection as well as operation specification. By lots of graphical representation and examples, the uses can quickly learn to use the DDCS CNC system.