Solidcam stock-target problem
Hello,
I have problem with merging stock and target. Stock is imported with STL file, target is normal part. The problem is shown on picture. Coordinate system on target and stock is on the same place.
Please help me if anyone knows how to solve this problem.
http://shrani.si/t/2D/y3/4sORfaLs/problem.jpg
Re: Solidcam stock-target problem
I solved it with using two configurations in the same part. One as target and other as stock. Now I have little problem with tool path. That is on some diameter, not on the surface. I tried a lot of different things, but without success. On contour I set the curve is wrapped around X axis. It looks like the Z level is constant whole time.
What can I do to solve this?
http://shrani.si/t/n/GL/24iuYbnj/sideproblem.jpg http://shrani.si/t/1E/RU/13j3OsXY/toolpath.jpg
Best regards,
Kristjan
Re: Solidcam stock-target problem
Use a multi axis operation