Re: I never understood what Fanuc people meant by Fansuck until this 5700.
Quote:
Originally Posted by
Green0
I only thought it was new because nobody seems to know about it and because Fanuc is out of stock on it. Doug probably is becoming aware of it in this thread. For $23 they should include it in the Ellison field training PDF and push it at every customer of the DNM5700. It is no different than a feature like flood coolant- it's great to have and doesn't cost much. (granted that's if it runs like control memory like Fanuc says it should).
My ellison Sales guy had never heard of it. An Okuma application guy who now sells Fanuc never heard of it. Other programmers online never heard of it.
I've been told one minor revision will allow the program to output complete when edited. Picture attached.
Attachment 412912
Just to be clear - the attached pic is for outputting the complete program including subs from memory.
I really do not know if this will work with this new magical Fanuc software though.
But please keep me informed on FB, as I don't get here anymore!
Re: I never understood what Fanuc people meant by Fansuck until this 5700.
Quote:
Originally Posted by
Green0
Thanks a lot that was a good example (your example) I had never seen that, and I have a cam instructor account and their example sucks compared to yours. It doesn't show sub calls.
Let me know how it works out for you. It should post perfectly, if it does not then there are issues with your post but that is not likely these days.
1 Attachment(s)
Re: I never understood what Fanuc people meant by Fansuck until this 5700.
Hello guys,
I did an earlier reply on this Fanuc Tool on the Fanuc-forum, but no respons by the Fanuc experts.
Also on this Doosan-forum, 10-2018, I did a reply on this issue, again no repons by the experts.
https://www.cnczone.com/forums/daewo...oftware-2.html
If they read these forums they know that this Tool is available and than they have to do some research on this item.
If you do lots of 3D milling with large programs then you buy a 2Gb/4Gb DATA server, I heard some prices about $5000 or $6000.
Extra internal memory is also expensive, 2Mb max. for the 0i-series, 8Mb for the 30i-35i-series.
For all the other Fanuc 0i / 30i-32i users this €20,- ( $23,- ) program could be a solution, thats what it costs at Fanuc Benelux / Europe.
I wonder what it costs in the USA or the UK, the €20,- was the price we paid in March 2018, ordered at Fanuc Benelux, €15,- "shipping-costs",
but we had 2 products and the invoice says for both products, "country of origin", - JAPAN, so thats the €15,- shipping costs.
Every Fanuc "expert" who sells Fanuc products has to look into the Fanuc Function Catalogue, it a PDF with all the Fanuc funtions and software.
Regards,
Heavy Metal.
The attachment is from the Fanuc Function Catalogue 2018.
3 Attachment(s)
Re: I never understood what Fanuc people meant by Fansuck until this 5700.
Hello guys,
This is for all FANUC-0i / 30i - users with max 512kb memory, I don't know if it works on the 0i-MC series.
I made a FANUCPRG.BIN file that you can try if you want, it's METRIC.
It's a Cimco-Edit 800kb sample-NC-file that's also stored in the zip-file, original file-name LEFTOVER.NC, 1Mb.
I removed the line-numbers, minimal Z-value is 0, but for safe run put a value of 100. or 200. in the Z - EXT (WORK) table.
Copy the FANUCPRG.BIN file on your flash-card, use soft-key [MEM CARD], not the [MEMORY-CARD], that key show all files on the card,
the key [MEM CARD] show only O1500, that's the program you need.
Look also on post #30 for a video on this item.
If it works you can run a 800kb file on a 512kb memory, now you can run larger programs.
Good luck.
Regards,
Heavy_Metal.
Re: I never understood what Fanuc people meant by Fansuck until this 5700.
Hi guys,
Post #40 was 8 weeks ago, is there any interest on this item.
Did someone purchased the Card Tool, or received it or tried the BIN-file, or want a BIN-file with it's own nc-code ?
Regards,
Heavy_Metal.
Re: I never understood what Fanuc people meant by Fansuck until this 5700.
I never got the Doosan Ellison field tips manual for this item which apparently is in the works, but the programmer here did use the memory tool which came in the mail after about 6 weeks, and it totally clears up that deficiency of the DNM5700 and makes it competitive with anything out there in terms of memory storage. I have the short card that fits in the control with the door closed too, so it's pretty sweet. I think they should just charge the doosan buyers $22 more for the machine and include the disc with every new machine. It keeps people from having to go on a 4 month information gathering mission to find the solution to the OI control memory. I'm really happy with the mill, and now we never waste time managing program memory. The operators like to run the programs like normal programs that fit in the control (search replace, restart wherever, etc), we're not spending admin time managing programs or knitting programs together, it's just really nice this way.
The DNM5700 is kind of a workhorse. It will work 6am to midnight week in and out without complaining or showing any signs of wear.
Re: I never understood what Fanuc people meant by Fansuck until this 5700.
Quote:
Originally Posted by
Green0
I never got the Doosan Ellison field tips manual for this item which apparently is in the works, but the programmer here did use the memory tool which came in the mail after about 6 weeks, and it totally clears up that deficiency of the DNM5700 and makes it competitive with anything out there in terms of memory storage. I have the short card that fits in the control with the door closed too, so it's pretty sweet. I think they should just charge the doosan buyers $22 more for the machine and include the disc with every new machine. It keeps people from having to go on a 4 month information gathering mission to find the solution to the OI control memory. I'm really happy with the mill, and now we never waste time managing program memory. The operators like to run the programs like normal programs that fit in the control (search replace, restart wherever, etc), we're not spending admin time managing programs or knitting programs together, it's just really nice this way.
The DNM5700 is kind of a workhorse. It will work 6am to midnight week in and out without complaining or showing any signs of wear.
Hi Green0,
I'm glad it works fine for you right now, I like the Fanuc Edit Tool aswell.
Thanks for your reply.
Regards,
Heavy_Metal
Re: I never understood what Fanuc people meant by Fansuck until this 5700.
You can always drip feed from the PC card or Data server option.
Re: I never understood what Fanuc people meant by Fansuck until this 5700.
Quote:
Originally Posted by
DouglasR
You can always drip feed from the PC card or Data server option.
Hello DouglasR,
We discussed the dnc/dripfeed and M198 earlier, also a $5000,- / $6000,- Dataserver option, or extra memory a $1000,- per Mb.
When you visit the Fanuc website you only find a discription about the Edit Tool but nothing more.
https://www.fanucamerica.com/product...dMXXtxsQU8upFA
When you don't contact Fanuc you'll never find out what they sell, even no good discription about the Edit Tool.
Fanuc Memory Card Program Edit Tool - Version: 5.00 - Fanuc A08B-9010-J700/ZZ11
It's strange when there's a cheap solution for Fanucs memory problem only a few people know about this tool.
Can I ask you, do you sell this tool, or do you know that it exists, or do you know how it really works, or that you'r going to do some research to it ?
Most Fanuc sellers don't know that the Edit Tool even exists.
Regards,
Heavy_Metal.
Re: I never understood what Fanuc people meant by Fansuck until this 5700.
Milking customers all the way. Fanuc Memory Card Program Edit Tool - 20eur, no profit, data server 6k, couple grand profit.
Just my 2 cents.
Sent from my D5803 using Tapatalk
Re: I never understood what Fanuc people meant by Fansuck until this 5700.
Quote:
Originally Posted by
Heavy_Metal
Hi guys,
There is a video on Youtube with the Fanuc Memory Card Program Tool v4.
They show the Program Tool on a Fanuc 31i-Model B.
The FANUCPRG.exe file is from 2011-10-12, it's Version 4.0
We have the Version 5.0, date 2014-05-15, it's a small 600Kb exe. file.
I think it's the same as shown in the video.
https://www.youtube.com/watch?v=OTw1kL5ha-A
Regards,
Heavy_Metal.
Could you share version5.0??