7 Attachment(s)
DesignEdge cutting length measurements off
Has anyone had problems with the machine not cutting the correct size of material as what is shown on their computer. Everything is currently cutting short on the length side of the table(x axis) but the width (y axis) side is perfect. About every 12” the machine is off .75” short. I have picture of my setting and the measurements of what I want it to cut to what it actually cut.
Re: DesignEdge cutting length measurements off
03-07-2021
Hi,
Those photos are useless. Too blurry. however, I would be glad to help you figure out the problem, if you have not already done so. Where are you located?
Joe
>>>> addmenow (at) mail (dot) com <<<<