Re: EnRoute 4 Scaling issue
Most likely you are not saving the G code with the correct post processor loaded. It is kind of like a printer driver. There are several that come with the software. You have to find the one that will work with your CNC machine controller. It might be moving in and out of relative and absolute positioning. Also, is the scaling correct inside Enroute when you have a bounding box around the selected geometry. You can also mess things up accidentally when moving objects around if you are not careful. If you drag on one of the handles wrong you can scale it a little bit without realizing it.
Re: EnRoute 4 Scaling issue
Thank you, my shop had to reinstall the software and didn't realize that the active drivers reset when they did. After correcting the active driver the issue is no longer apparent.
Once again, thank you for your help