2 Attachment(s)
Problem with table DMU 60P
Hi everyone!
I own a 1999 Deckel Maho DMU60P (5axis table/table).
I have a problem with the table. Table moves freely 0.25mm, this also manifests itself during processing, most often during drilling, and I can also move it with my hands (I will attach a video).
At the same time, the axis of rotation and tilt work properly, but due to the backlash, it is almost impossible to process parts.
If someone faced this problem and could help, at least suggest in which direction to move. Perhaps someone has a technical manual.
Perhaps it is necessary to dismantle the table, if so, how to do it correctly without damaging anything.
I will be glad for any help.
Thank you in advance!
Re: Problem with table DMU 60P
Thanks for the answer! I will try. If anyone else has any ideas, I'd be happy to read it.
2 Attachment(s)
Re: Problem with table DMU 60P
I also have a question about dismantling the table to know how it is done in case of some kind of incident.
If someone had experience in removing this kind of tables, tell me if there are any nuances in dismantling.
If I unscrew 12 bolts in a circle and 4 in the center and carefully lift the table (I will attach a photo), will I be able to lift it without damaging anything inside the table. It's interesting to hear how it's done.
Perhaps someone has drawings or a technical manual for these machines. It would be useful for me too.
Thanks again!