When I do a radius using g42 and manual guide I, They come out a 1/64 over what they are programed to. Nose radius is set to correct nose radius. Curious if there is a parameter I should look into. Or is there something I'm overlooking.
Printable View
When I do a radius using g42 and manual guide I, They come out a 1/64 over what they are programed to. Nose radius is set to correct nose radius. Curious if there is a parameter I should look into. Or is there something I'm overlooking.
Lathe or mill ?
Inside or outside contour ?
Post the NC file.