Understanding manual tool release wiring diagram for HSD ES919 Spindle
Hey Guys I'm struggling understanding how to wire up my HSD manual tool release and was looking if someone can help me figure this out!
https://i.imgur.com/7JuRzmz.png
https://i.imgur.com/bpfIj8J.pnghttps://i.imgur.com/0uojm8r.png
So im confused how to hook up the wires on the pigtail. I understand pin 7 wire will go to a 24v power supply, I dont understand what I connect the pin 8 wire to? Is "P" something I have to add or something that was possibly on the old Controller board or something inside the spindle itself? Andddd I dont understand "C" and "E" lol Any help would be greatly appreciate!
Thanks
-Benny
Re: Understanding manual tool release wiring diagram for HSD ES919 Spindle
So I discussed this further with a friend and I think I have a little better understanding-- or at least enough to test a theory. is the 8 "Button Output" an optional connection for an external control? IE controller software?
Re: Understanding manual tool release wiring diagram for HSD ES919 Spindle
Looks like the button just connects pins 7 and 8 on the connector. You need to supply 24V power and an air solenoid at the minimum.
Re: Understanding manual tool release wiring diagram for HSD ES919 Spindle
Quote:
Originally Posted by
muibubbles
Hey Guys I'm struggling understanding how to wire up my HSD manual tool release and was looking if someone can help me figure this out!
https://i.imgur.com/7JuRzmz.png
https://i.imgur.com/bpfIj8J.pnghttps://i.imgur.com/0uojm8r.png
So im confused how to hook up the wires on the pigtail. I understand pin 7 wire will go to a 24v power supply, I dont understand what I connect the pin 8 wire to? Is "P" something I have to add or something that was possibly on the old Controller board or something inside the spindle itself? Andddd I dont understand "C" and "E" lol Any help would be greatly appreciate!
Thanks
-Benny
Hi,
I am in the same situation, I only want to use the button to do tool changes. Did you ever figure this out?
thanks
Rob
Re: Understanding manual tool release wiring diagram for HSD ES919 Spindle
Ok, I got it...
It is all about the solenoid (Not Supplied). I originally thought the their was a solenoid within the unit itself.
Need to wire 8 pin (Button output) inline with the solenoid (Normally Closed).
Re: Understanding manual tool release wiring diagram for HSD ES919 Spindle
Quote:
Originally Posted by
rchristie
Ok, I got it...
It is all about the solenoid (Not Supplied). I originally thought the their was a solenoid within the unit itself.
Need to wire 8 pin (Button output) inline with the solenoid (Normally Closed).
Hello . I have the same problem. I have a es929 but can not figured out how to put it to work the release tool.
Can somebody help?. And explain about the solenoid and the pin 8