6 Attachment(s)
New LetterCAM Software Released!
Hi Everyone,
LetterCAM is a new program written by myself for creating G-Code and DXF files from true type fonts. The program was mainly written for cutting out letters. The program is very easy to use. Just enter the text and select the font / size. If your saving to gcode, you can set the cut depth and Z increment also among other settings. When the toolpath is drawn, you can see that LetterCAM will cut the inside of the letters first and then the outside.
Below are some screen shots of LetterCAM. We also have a video to watch from our web site. As more features are added, we will post them here.
http://www.LetterCAM.com
Screen Shot # 1 - Main screen of LetterCAM with letters drawn in the window.
Screen Shot #2 - Each angle in the letters are shown here. As the precision adjustment is increased, the angles increase which result in a smoother cut letter.
Screen Shot #3 - Different font shown here with a higher precision setting.
Screen Shot #4 - Toolpath is drawn here. Notice the inside of the letters are to be cut before the outside area.
Screen Shot #5 - A list of fonts available with a larger view of each. Gives the user an easier way to select their fonts.
Screen Shot #6 - Settings screen where the cut depth and Z increment are entered. More setting screens are included such as colors, extensions, etc.
