I need to make a cut useing a V-bit.
Y axis is fixed and the X axis travels 400mm
During this cut the Z axis starts at 0 and ends at -4mm
Is there an example on how to do this in G code? Or is it more complex then that?
Thank you,
Robert
Printable View
I need to make a cut useing a V-bit.
Y axis is fixed and the X axis travels 400mm
During this cut the Z axis starts at 0 and ends at -4mm
Is there an example on how to do this in G code? Or is it more complex then that?
Thank you,
Robert
G0 X0.0 Z0.0
G1 X400.0 Z-4.0 F100
G0 Z0.0
Thank you Jim,
This worked just as I was hoping for!!!
Robert
Glad it worked for you. Happy to help.