Could someone tell me what a 128 ps alarm is on a Fanuc OM-d control ?
It must be some sort of communications alarm. I got it working. Just wanted to know. I don't have it listed in my book.
Thanks, Pete
Printable View
Could someone tell me what a 128 ps alarm is on a Fanuc OM-d control ?
It must be some sort of communications alarm. I got it working. Just wanted to know. I don't have it listed in my book.
Thanks, Pete
PS128 Illegal Macro Sequence No, macro ID not between 0 & 9999 , cannot be searched.
Al.
I guess it wasn't a communications alarm.
I fiddled around with the cables and restarted the program and it ran. That's why I thought it was a communications alarm. It must not of seen something at the very start of my program. It didn't even read the second line.
Thanks again, Pete
I had the same error today. I had the communications parameters wrong at the pc.
HI DEAR
NEED HELP SUM DAYS AGO MY PC BURN AFTER STORM . WE CHANGE PC NOW WE START SENDING NC FAIL TO CNC .CNC CANT WORK IN DNC MODE .SOME BODY TOLD US THE COMMUNICATION IC NO 75188 AND 75189 BURN . WE CHANGE THESE TWO NOW WE SEND PROGRAM TO CNC PS 128 ALARM CAME
change your settings on your pc
dear sirQuote:
Originally Posted by mbservice
what kind of sitting. we change bud rate stop bit xon xof and pairty butt nothing works
Please post your program as there could be a problem with it ?
It is not sending program correctly
Does it work when you send a standard file eg not drip feed
Did you find the problem? I'm having the same problem ps128 while dnc. Please advice..Quote:
Originally Posted by qamar
Thx
DHYSTA 02:53 PM Today
Finally DNC transfer is back to normal after replacing PC serial card..
I got the same problem since 2 Months, I have changed Communication cables but failed, should I change PC?Quote:
Originally Posted by DHYSTA