Puma 10HC parameter problem
Hello all.
We just bought a used Puma 10HC -95 Fanuc 0T-C
The problem we have is that the machine was sitting with no battery at the seller.
We got a parameter list with the machin. But it is not from my machine!!
Wehere can i get a copy of the parameters to my model? Tryed the Swedish reseller but NO. Thay did not want to help.
serial PH100479
my problem is that if i make a program that turns a bit into different diameters. say 20mm, 30mm, and 40mm only one of them is right. The encoder parameter must be wrong. X amaount of puls / mm
But i cant find what parameter it is.
Re: Puma 10HC parameter problem
Quote:
Originally Posted by
Sastrom
We got a parameter list with the machin. But it is not from my machine!!
Did you get a list for a generic Puma10HC w/0TC? ...or for a different machine, entirely?
Re: Puma 10HC parameter problem
I do not think its fot a Puma 10hc
the serial on the paramerer list is way of.
I will see if thr machine specs is printed on the parameter list
Re: Puma 10HC parameter problem
The Danish reseller emailed me the copys of the parameters to my mashine.
Re: Puma 10HC parameter problem
Anyone know howto transfer the paramers to the machine?
The files, 2, are in .tap format
Re: Puma 10HC parameter problem
Well i'll answer myself.
Fix the communication parameter manualy.
The set PWE to 1, go to parameter setting and pusch EOB and Input reading from DNC starts
Same for diagnose parameters but you should be in diagnose settings and pusch EOB and Input