Need help, Daewoo PUMA 6 s missing parameters
Hi,
We have a Daewoo PUMA 6-s serial #0593 with Fanuc O-T the machine has been shut down for 3-4 years and when we tried to hook it back up it turns out that the power and mainboard was fried. We have changed mainboard, power, I/O, memory and axis cards and successfully booted up again
We are now facing to add all parameters to get the machine up and running and by that we need some help
our specs:
All Fanuc parts:
Mainboard: A02B-0098-B511
Mainboard power: A16B-1212-0950
Graphic: A16B-2201-0350/07A
Memory: A16B-2201-0101/07A
I/O: A16B-1211-0970/01A
Axis: A16B-2200-0391
X axis Motor: A06B-0128-B177
z axis motor: A06B-0143-B077
Power supply A06B-6087-H115
Spindle amp: A06B-6088-H215
Servo amp: A06B-6+079-H208
Any input to get us back up running in terms of parameters would be greatly apriciated, sorry for any bad English
Regards RTS Norway
Re: Need help, Daewoo PUMA 6 s missing parameters
No one with the parameters?, we are not able to find the input anywhere and are currently stuck with a non working machine, any help would be appriciated
Re: Need help, Daewoo PUMA 6 s missing parameters
I'm back in the office.
What is the control version?
(normally, I can track the serial number, but this one was not sold in the US)
Re: Need help, Daewoo PUMA 6 s missing parameters
Quote:
Originally Posted by
dhardt
I'm back in the office.
What is the control version?
(normally, I can track the serial number, but this one was not sold in the US)
As per PM, we tried the parameters posted in the tread and there are loads of parameters/tables missing and also parameters belonging to Fanuc OT-A witch contain tables and params we do not have on our machine. Ty for the help but it looks like we have to just wait until we have a complete list belonging to this model. We have also tried the parameters for the PUMA 8S posted in another tread and those atleast give some functions enable but fail to communicate with servos(s), We need the motor/servo values along with the main parameters for the operation of the machine
Re: Need help, Daewoo PUMA 6 s missing parameters
We are in a similar boat. Puma 6s with Fanuc O-T controller. Lost parameters. Getting error F-068, indicating need to enter spindle parameters into O-T controller, but don't have them. Any help would be appreciated!
Re: Need help, Daewoo PUMA 6 s missing parameters
