4 Attachment(s)
Perfect solutions for making a professional CNC router
I've seen a lot of improvisation and semi-solutions for the X axis, but I like this one the most
Attachment 463156
Attachment 463158
Attachment 463160
Attachment 463162
I accidentally found it on this site https://vallder.com/en/c/alu-profile...-200x96-detail
I would like to see some examples if someone made a CNC router with this profile so if they can show us an example of the whole router. I am interested in the impressions with the vibrations and stiffness of that aluminum profile.
Re: Perfect solutions for making a professional CNC router
Wow, that looks incredibly useful. Nice find!
Re: Perfect solutions for making a professional CNC router
Quote:
Originally Posted by
Nikanor
Xzero looked at this extrusion a few years ago, I'm not sure they may have extruded there own at one stage in a much thicker section, this Extrusion is to light in the web to be of any use for a CNC Router
3 Attachment(s)
Re: Perfect solutions for making a professional CNC router
looks very thin-walled and very thin bolt holes
this profile is 7 pounds a foot Attachment 465904
Attachment 465906
Attachment 465908
Re: Perfect solutions for making a professional CNC router
Quote:
Originally Posted by
gio666
Nice to see you post something are you back or just tinkering
2 Attachment(s)
Re: Perfect solutions for making a professional CNC router
Quote:
Originally Posted by
mactec54
Nice to see you post something are you back or just tinkering
yes just starting to sell kits for DIY
profiles and frame kits 1200x1200mmm
my domain was hijacked and stolen
Attachment 466310
Attachment 466312Attachment 466312
Re: Perfect solutions for making a professional CNC router
Quote:
Originally Posted by
gio666
No, strength has little to do with wall thickness but only with the positions of structural stiffeners. The ribs that stiffen the profile are placed directly according to the resistance of external forces. The thickness was calculated so as not to increase the inertia of the profile to improve the dynamics and resonance resistance. The profile was constructed by a team of experienced engineers who took into account the dynamics (lightness) and resistance to bending and resonance.
The profile was tested before being put into series production and the results were identical to those expected during design and simulation.
Bolt holes are made for M10 and the holding force is proportional to the length of the thread, the user determines the depth of the thread and thus increases the holding force.
The projected holding force of the screws on one side of the profile is 36000N and 72000N total on both sides, which is oversized but is therefore evenly distributed.
2 Attachment(s)
Re: Perfect solutions for making a professional CNC router