wasino profile grinder fanuc om won't home
I'm working on a wasino 135as profile grinder with fanuc om controller. I believe that the backup batteries were changed and lost homing program/parameters. When I try to home the machine , it tries to home the z-axis which the machine doesn't have. And it won't allow me to input any parameters until it homes?
Re: wasino profile grinder fanuc om won't home
Today it won't home in x-axis. Error 90 and then 511 overtravel. I tried the fanuc memory restore procedure and can only get to step 6 where it says to select EDIT mode. It won't allow me to select edit, it kicks it back to the home button??
Re: wasino profile grinder fanuc om won't home