Postprocessor for OSAI

Good Day All.

This is my 1st post so I do hope this is the right place.

I have worked on CMS Brembana machine with OSAI and Easy Stone software from DDX Group from ITALY but I would like to starting work with PowerMILL.

So, I look for POSTPROCESSOR for OSAI to PowerMill (DELCAM) Software.

Maybe, PowerMill has compatible postprocessors with OSAI.

Hi collegue, I also use just start to use PowerMill for stoneworking, I use Emmedue Discovery and GMM Blizz (now on mounting).
If G-code of you machine isn't very cmplicated i could cend you my post.

Hi MFS

Can you please send me your post processor to [email protected]

Thanks

Mahesh

Hello,
I have a postprocessor for SOLIDCAM.

Hello
I have an OSAI Series 10 , Vertical cnc machine , 5 Axis,
XYZAC
also it has a rotary B attached on his table
can you send me any post for Alphacam or NX or MasterCam or PowerMill please.