Lb15 150 Alarm-A Coupling Device Illegal 4
Hi
After a year of the lathe being down I put new bubble memory in the machine and loaded the control tapes.
The machine now has an alarm 150 alarm-a coupling device illegal 4.
I seem to recall there was a plug in the round parallel port that had a wire jumping some pins because we don't have the Lns barfeeder installed.
The plug isn't there anymore as someone removed it without knowing what it done.
The control is a Osp 5000L. The machines a 1984.
Does anyone know what pins need to be jumped to make the alarm go away?
Thanks Brent
2 Attachment(s)
Re: Lb15 150 Alarm-A Coupling Device Illegal 4
Hello,
I have a couple of pictures for our LB15. It is a 1987 with the OSP5000L-G control. Perhaps this will help you solve your issue.
https://www.cnczone.com/forums/attac...d=464462&stc=1https://www.cnczone.com/forums/attac...d=464460&stc=1
Good Luck,
Dave
Re: Lb15 150 Alarm-A Coupling Device Illegal 4
awesome can you send them thru to me please?
2 Attachment(s)
Re: Lb15 150 Alarm-A Coupling Device Illegal 4