Questions on Agiecut 120

Printable View

11-11-2015, 01:31 PM
mike at cameron

Questions on Agiecut 120

Hello all,

We have Agiecut120. it was new in 1994, and we purchased it in 2006. We are just now seriously trying to get up ad running.

We already replaced many parts to get all the pumps up and running, it has the wire auto thread feature.

Question1....... How to set the bath tank level? when we fill the tank, it only fills about 1/4 (to the top of the work piece pedestal.
Question 2......We manually threaded the wire, did the wire cut, but when we try to auto re-thread, the centering jet fails to come on so the wire misses the bottom nozzle. What should we look for to make the water to turn on?
11-12-2015, 12:15 PM
mike at cameron

Re: Questions on Agiecut 120

Can anyone help?

Another problem occurred yesterday one DA pump will no longer come on an SE3 keeps tripping. I believe SE3 must control this pump.
05-15-2016, 04:06 PM
voaferro

Re: Questions on Agiecut 120

Quote:

Originally Posted by mike at cameron

Hello all,

We have Agiecut120. it was new in 1994, and we purchased it in 2006. We are just now seriously trying to get up ad running.

We already replaced many parts to get all the pumps up and running, it has the wire auto thread feature.

Question1....... How to set the bath tank level? when we fill the tank, it only fills about 1/4 (to the top of the work piece pedestal.
Question 2......We manually threaded the wire, did the wire cut, but when we try to auto re-thread, the centering jet fails to come on so the wire misses the bottom nozzle. What should we look for to make the water to turn on?

Hello ! I´m trying something similar .... A friend/colleague has a Stoped Agiecut 120 since christmas...
Lack of software
- Would u be in the possition to make a Ghost copy of your duisk drive ? pls ?
A.Ferreira - voaferro ! Portugal
06-08-2019, 06:18 PM
zimmy b

Re: Questions on Agiecut 120

Hi Mike
Would you happen to have a copy of the installation disk and manuals for your 120?
06-16-2019, 05:47 PM
zimmy b

Hi Mike
Would you happen to have a copy of the installation disk and manuals for your 120?

Quote:

Originally Posted by mike at cameron

Hello all,

We have Agiecut120. it was new in 1994, and we purchased it in 2006. We are just now seriously trying to get up ad running.

We already replaced many parts to get all the pumps up and running, it has the wire auto thread feature.

Question1....... How to set the bath tank level? when we fill the tank, it only fills about 1/4 (to the top of the work piece pedestal.
Question 2......We manually threaded the wire, did the wire cut, but when we try to auto re-thread, the centering jet fails to come on so the wire misses the bottom nozzle. What should we look for to make the water to turn on?