im trying to use a bar puller can someone show me what the code would look like? or just tell me what the code for the jaws open and close are i think the rest should be pretty straight up i think
:withstupi
Printable View
im trying to use a bar puller can someone show me what the code would look like? or just tell me what the code for the jaws open and close are i think the rest should be pretty straight up i think
:withstupi
I believe the m codes are m10 and m11
Here is a macro I made, you can use this as a sub program or sub your program at the end of this one.
O6000
(BAR PULLER)
(.500 OF MATERIAL MUST BE LEFT AFTER PART OFF)
#1=3.5 (OD OF BAR)
#2=.5 (BACK Z OF PARTOFF)
#3=.5 (PULL OUT)
#4=0101 (TOOL STATION)
#5=300 (IPM)
G0T#4
X[#1+2.0]
Z[#2-.375]
G98
G1X0.0F#5
M11
Z#3
M10
X[#1+2.000]
G28U0
G28W0
G99
M30
%
Hope this helps!!!