Hardinge CHNC 1 emergecy stop 6000

Hi All,

Subject to my previous post on my Hardinge CNHC1 Siemens 810T control, So now I have managed to get the machine to power up (the fault was a short in the turret encoder) It took
me an age to find! I have removed the faulty unit, looks like its sealed in some sort of resin?

I now have a 6000 Emergency Stop, my question is will the machine give me this E-stop even though I have removed the faulty unit (I thought I might still be able to move the axis and maybe
start the spindle? as I do not get any alarms related to the turret?

Thanks for any help.

Allen

Make sure BOTH of the emergency stops are off, then clear the alarms. You can do nothing until that alarm is cleared. I had a bad E-stop switch on mine once.

Hi,

Thanks for your reply greatly appreciated, Yes I have done that, I have also checked both e-stops with a digital meter and both are good, The machine is not on the hard stops (I always move the axis
well clear of the limit switches before I shut the machine down,

Is it possible with the turret encoder removed that this would cause the e-stop? (6000)

Thanks Allen.

Nope, looks like just the e-stop switch.

See attached

I have a spare E stop switch if needed ! [email protected]

Ed

That's good, hope you find the problem. Hard to help you from long distance! :)

Hi,

Thanks for the attachment, a great help! So you don't think that with the turret encoder completely removed it will give me an E-stop? that was my thoughts? do you think it could be a faulty limit switch?

I have been trying all day to clear the alarm but no luck

Thanks again for your help

Allen.

Hi Ed,

what about a Turret encoder?

Thanks,

Allen

Allen,
What # is on yours ? C2-137B Can't read the number on the other one
ed

Hi Ed,

Yes! that's exactly the same number, C2-137B Have you got one?

Allen.

Allen,
Yes i do !!!!! Make me a fair offer . Is there anything else you need ? Give me an address to send ! Can you pay by paypal ? If so i can send you an invoice .
Ed

Hi Ed,

Yes I can pay via PayPal, I don't no where to start with an offer, got no idea what they cost new (not that you can get them now) I am in the Uk so obviously there will be postage costs
Can you give me a price or somewhere to start?

Allen

Allen,
company owner said $150 with shipping and i well give you a e stop ! How does that sound ?

Ed

Hi Ed,

Yes that sounds ok to me, can you just confirm that the part is in good working order, and also I will need your e-mail address to send money via PayPal,

Thank you,

Allen

Allen,
I myself removed it ! It was working fine when removed a month ago . [email protected] is mine . [email protected] send for payment and address to send parts
thanks
Ed

Hi Ed,

So you have given me two E-mails what one should I send money to? bit confused with your reply,

Allen.