Re: 6040 CNC VFD settings?
Hello everyone, I finally managed to set the spindle speed also from Gcode and I briefly list the steps.
I use LinuxCNC and these are the settings working with Stepconf:
pin 1 = PWM spindle, invert popped
pin 2 to 9 = 4 axes (XYZA)
pins 14 and 16 unused
pin 17 = Amplifier Enable
pin 10 = Estop In
pin 11 = probe
pin 12/13/15 = limit switch sensors
Spindle configuration
PWM Rate = 100
Speed1 = 0
Speed2 = 24000
PWM1 = 0
PWM2 = 1
I do not know if everything is set as originally, but after almost 2 years of hard work is back to work ****** ALL BIG !!!
Re: 6040 CNC VFD settings?
Quote:
Originally Posted by
Starnovice
Where did you find it and how can I get a copy?
It is attached to the post in a rar archive.
I don't remember where i found it either, but it is here now!
Re: 6040 CNC VFD settings?
Quote:
Originally Posted by
RoddQLD
As written in my first post "I have a 6040 CNC with the VFD and control box as shown in the attached photo. (mine has PRT-E1500W written above the LED display)."
I made sure that I didn't import my CNC machine and bought it from an Australian seller/importer because if it is sold within Australia it is covered by Australian consumer laws.
We have a Department of fair trading that enforces consumer rights. I have been involved with them before and they can be very serious people when you are on the wrong side of them and my business was located 300 km's away from our major city. There is a minimum warranty period for all new goods sold in Australia. Ultimately, it doesn't matter at this stage as I am only asking that someone can jot down (or compare) the settings that I have given.
As an electrician and computer technician I am happy to evaluate whether the settings may apply. If someone gives me the settings from the same machine and only one setting appears out of whack then I have something to work with.
At the moment I have a brand new machine sitting here that I cannot use at all and it may just be due to one of those settings.
I know this is an old post but both eBay and Paypal have now become a law unto themselves and to hell with Fair Trading NSW. I'm in western Sydney, same scenario except the seller is happy to now give me a refund providing I send it back to China?? I bought the damn thing from a suburb not 15 minutes from me but nope if I want my money back I have to float up a wallet full of money to ship it to China registered post!!
Taff
Re: 6040 CNC VFD settings?
Hi, I am new also and I have bought a 800W 4axis CNC 3040T machine and I have it all working on Mach3 but not the spindle. I am having trouble working out the settings for the controller box. I too have changed the settings and now I can't get back to the original. I have the list of settings and I can set it all back to default but it always comes back to 50.00 on the screen. Manually this setting 50.00 will run the spindle only for a few seconds.
Can anyone help?
What am I missing?
Thanks
Re: 6040 CNC VFD settings?
Quote:
Originally Posted by
Rkjt
Hi, I am new also and I have bought a 800W 4axis CNC 3040T machine and I have it all working on Mach3 but not the spindle. I am having trouble working out the settings for the controller box. I too have changed the settings and now I can't get back to the original. I have the list of settings and I can set it all back to default but it always comes back to 50.00 on the screen. Manually this setting 50.00 will run the spindle only for a few seconds.
Can anyone help?
What am I missing?
Thanks
Make sure D001=1 if this is 0 then it is locked