machine all the time in rmt mode
hello
just like the subject, the machine is still in rmt mode
the machine is a milling machine SMC8650 with fanuc Oi MF software
despite turning the potentiometer to other modes (e.g. edit) the machine is still in rmt mode
What should you do to make the machine go into other modes?
in addition, nothing can be turned on from the operator panel, e.g. coolant or block-by-block mode
after resetting the PLC ladder and switching to manual activation, the machine goes into a different mode with a potentiometer but nothing else
Re: machine all the time in rmt mode
This requires way more information than you have provided.
When did this start happening?
Are you able to bring the machine out of E-Stop?
What do you mean "nothing can be turned on" from the op panel?
What do you mean you "reset" the ladder?
As someone who troubleshoots machinery for a living, I can tell you that you gave very little information.
Re: machine all the time in rmt mode
resetting the PLC ladder?
An 0i-MF (the current model) would not have Tape/Rmt mode
After a bit of research I think you are in the wrong sub-forum
Just because chairman Mao put a Fanuc sticker on it doesnt make it a Fanuc
I think this is what you have. But who knows.
GSKCNC.com GSK CNC Equipment CNC Machine AC Servo Motor Servo Drive CNC Controller CNC Milling CNC Lathe Turning OEM Stepping system Ball Screw Power American Chinese made China
Re: machine all the time in rmt mode
can you upload the ladder so we can open it and search for your problem?
Re: machine all the time in rmt mode
Hi
Do you solve your problem? My also CNC Milling machine, system also Fanuc 0i mf. I just install. I can not use. What happened, I don’t know? Can anybody help?
