Printable View
Hi all,
I am having an issue with the part catcher moving way to fast when retracting back to home position. Anyone have any thoughts on how to slow the speed down? I could not seem to find any parameters that would affect the speed, only the positioning of the catcher itself.
Thank you
I would assume this is the servo parts catcher? You would need to change the rapid parameter in the pmm (power motion manager) for that axis.
Sent from my A3-A20FHD using Tapatalk
PMM Parameter #40
Worked pretty well. Now only about 10% of the parts fall into the chip conveyor (Large part so none are lost).
5 inch part sometimes just gets thrown when cutting off even at 300rpm.