M49 freezes current version of TNG
I have some programms, where I use M49 to disable spindle and feed override.
That was working in the previous version of tng, but with the current version, the entire application freezes and could only be closed with taskmanager.
If you cant reproduce this, I may send you gcode with the issue.
Re: M49 freezes current version of TNG
I can not reproduce this.
1 Attachment(s)
Re: M49 freezes current version of TNG
I have attached the sample gcode which also freezes TNG in Simulation.
I just added G9 directly before M49 which solves the problem. But that wasn't an issue before.
Re: M49 freezes current version of TNG
This g-code ran fine on my machine. Export and send me your profile .zip file.
1 Attachment(s)
Re: M49 freezes current version of TNG
Profile attached.
You may need to do "homing" even in simulation to be able to start the gcode.
Re: M49 freezes current version of TNG
Please try latest version.
Re: M49 freezes current version of TNG
I can confirm that the issue is solved.
Thank you.