FANUC 0-TD LADDER DISPLAY
Hi friends, i am having lathe with Fanuc 0-TD. i want to alter the ladder diagram. but in the ladder page I am getting the following message.
"DISPLAYING THE LADDER DIAGRAM IS PROTECTED BY ITSELF"
But i changed the parameter #60 bit 2 in to one. still i cant able to view the ladder diagram. kindly give the soultion for this problem.
Regards,
Keyan
Re: FANUC 0-TD LADDER DISPLAY
Re: FANUC 0-TD LADDER DISPLAY
Hi friends,
I am having Hardinge VMC with Fanuc 0-MD. I want The Display of ladder diagram. but in the ladder page I am getting the following message.
"DISPLAYING THE LADDER DIAGRAM IS PROTECTED BY ITSELF"
Kindly Suggest what to do to release the Protection.
With Regards,
L. Sakthivel
1 Attachment(s)
Re: FANUC 0-TD LADDER DISPLAY
Quote:
Originally Posted by
L. Sakthivel
Hi friends,
I am having Hardinge VMC with Fanuc 0-MD. I want The Display of ladder diagram. but in the ladder page I am getting the following message.
"DISPLAYING THE LADDER DIAGRAM IS PROTECTED BY ITSELF"
Kindly Suggest what to do to release the Protection.
With Regards,
L. Sakthivel
May be "kind" MTB doesn't want that anyone sees the ladder and didn't leave any opportunity to turn it on by setting on the G119#0
Attachment 398152
Re: FANUC 0-TD LADDER DISPLAY
Quote:
Originally Posted by
rai
please tell me the machine tool builder name. or send me your eproms oe1 & 2.
dear Sir,
i have a proble on FANUC 0 series LADDER,
the view LADDER diagram is protected,
the message is "DISPLAYING THE LADDER DIAGRAM IS PROTECTED BY ITSELF"
my machine lose all parameter, and i don't have the pc parameter.
how to unprotect or allow to display ladder diagram?
please help me
thanks
harry