1 Attachment(s)
need help - novusun NCH02 - stops always to the very same line of part program
HI,
hope someone can help me.
In Fusion 360 I made same 2D pockets (see image attached) and I uploaded through the USB Key to the novusun controller (NCH02 / NCD02).
It always stops (and I do not know why) to the same line during the 4th pocket as I pointed out.
There is no alarm, simply the spindle remains ON at the same speed but it doesn't move anymore. It's paused by something.
I repeated the operation in various areas of the machine with the same result.
I checked the program generated by Fusion 360 but it's plain Gcode and it seems, to me, all right.
As post processor I used Mach3Mill
Thanks for any help.
Re: need help - novusun NCH02 - stops always to the very same line of part program
Hi, my ddcsv2.1 have same problem...
My is hardware problem, try clean usb contact
Quote:
Originally Posted by
matur61
HI,
hope someone can help me.
In Fusion 360 I made same 2D pockets (see image attached) and I uploaded through the USB Key to the novusun controller (NCH02 / NCD02).
It always stops (and I do not know why) to the same line during the 4th pocket as I pointed out.
There is no alarm, simply the spindle remains ON at the same speed but it doesn't move anymore. It's paused by something.
I repeated the operation in various areas of the machine with the same result.
I checked the program generated by Fusion 360 but it's plain Gcode and it seems, to me, all right.
As post processor I used Mach3Mill
Thanks for any help.
